RO Water Makers

Schambo RO Water Makers

Our systems are built to the industry standard for the oil and gas offshore market. These systems meet the requirements for transporting offshore and electrical classification requirements. All components, piping and instrumentation are designed to withstand offshore environment. Equipment is well maintained and all test reports and field reports are filed.

100 BPD250 BPD500 BPDDual Pressure SetALLN1 RO-Tank-Pressure SetFilter Vessel

 

100 BPD RO Water Maker (Patent Pending)

Patent Pending

Skid Dimensions & Weight:

  • 3’2″ Wide
  • 3’2″ Long
  • 6’6″ Height
  • 2,500 Lbs

100 BPD (4,200 GPD) System Flow Rates:

  • Seawater Feed 8.37 GPM
  • Freshwater 3 GPM
  • Brine Reject 5.37 GPM

System Shut Down Indicators:

  • Yellow Amber Lights Located on Front of Electrical Panel
  • Low Main Pump Suction Pressure
  • Oil Level High/Low
  • High Filter Differential Pressure
  • High Total Dissolved Solids

Safety Features:

  • Red Emergency Shut Down Switch
  • High Pressure Safety Valve Set to 1000 PSI
  • RO Vessel Factory Tested to 100 PSI
  • RO Vessel Burst Pressure 6000 PSI
  • Skid Load Test & Sling Recertified Every 12 Months
  • Electric Panel & Components Meet Class I Div. II Rating
  • Fully Enclosed Belt & Pully Guards

Instrumentation & Meters:

  • Cartridge Filter Inlet Gauge (Seawater Feed)
  • Cartridge Filter Differential Gauge
  • Cartridge Filter Outlet Gauge
  • 0-5 GPM Freshwater Flow Meter
  • RO Membrane Pressure Gauge
  • RO Membrane Pressure Regulator
  • Total Dissolved Solid Meter (TDS) Set to 1000 PPM

Key Features & Included Items
  • All Stainless Steel Piping, High Pressure Hose Ends, Low Pressure Hose Ends
  • High Pressure Pump Fluid End Made With Duplex Stainless Steel For Long Lasting Operations.
  • Access To Filter Vessel For Quick & Easy Filter Changes When Needed.
  • Installation, Operating Instruction And Troubleshooting Tips Clearly Visible On Front Of Sytem
  • Schambo Manufacturing LLC Contact Information On Every Skid. Phone, Fax, Web Site..
  • 150’ Power Cord Included With Every Rental System.
  • 100′ Feed Water Hose, 100′ Freshwater Hose And 100′ Brine Reject Hose Included With Every Rental.
  • Drain Plugs Located On Both Ends Of The Skids With Sloped Drain Pans.
  • DISA Participant
  • ISNet World
250 BPD RO Water Waker Skid Dimensions & Weight:

  • 3′ Wide
  • 5’6″ Long
  • 6’2″ Height
  • 3,200 Lbs

250 BPD (10,500 GPD) System Flow Rates:

  • Seawater Feed 20 GPM
  • Freshwater 7.30 GPM
  • Brine Reject 12.70 GPM

System Shut Down Indicators:

  • Yellow Amber Lights Located on Front of Electrical Panel
  • Low Main Pump Suction Pressure
  • Oil Level High/Low
  • High Filter Differential Pressure
  • High Total Dissolved Solids

Safety Features:

  • Red Emergency Shut Down Switch
  • High Pressure Safety Valve Set to 1000 PSI
  • RO Vessel Factory Tested to 100 PSI
  • RO Vessel Burst Pressure 6000 PSI
  • Skid Load Test & Sling Recertified Every 12 Months
  • Electric Panel & Components Meet Class I Div. II Rating
  • Fully Enclosed Belt & Pully Guards

Instrumentation & Meters:

  • Cartridge Filter Inlet Gauge (Seawater Feed)
  • Cartridge Filter Differential Gauge
  • Cartridge Filter Outlet Gauge
  • 0-10 GPM Freshwater Flow Meter
  • RO Membrane Pressure Gauge
  • RO Membrane Pressure Regulator
  • Total Dissolved Solid Meter (TDS) Set to 1000 PPM

Key Features & Included Items
  • All Stainless Steel Piping, High Pressure Hose Ends, Low Pressure Hose Ends
  • High Pressure Pump Fluid End Made With Duplex Stainless Steel For Long Lasting Operations.
  • Access To Filter Vessel For Quick & Easy Filter Changes When Needed.
  • Installation, Operating Instruction And Troubleshooting Tips Clearly Visible On Front Of Sytem
  • Schambo Manufacturing LLC Contact Information On Every Skid. Phone, Fax, Web Site..
  • 150’ Power Cord Included With Every Rental System.
  • 100′ Feed Water Hose, 100′ Freshwater Hose And 100′ Brine Reject Hose Included With Every Rental.
  • Drain Plugs Located On Both Ends Of The Skids With Sloped Drain Pans.
  • DISA Participant
  • ISNet World
500 BPD RO Water Maker Skid Dimensions & Weight:

  • 3’6″ Wide
  • 6’6″ Long
  • 6’4″ Height
  • 4,200 Lbs

500 BPD (21,000 GPD) System Flow Rates:

  • Seawater Feed 35 GPM
  • Freshwater 14.60 GPM
  • Brine Reject 20.40 GPM

System Shut Down Indicators:

  • Yellow Amber Lights Located on Front of Electrical Panel
  • Low Main Pump Suction Pressure
  • Oil Level High/Low
  • High Filter Differential Pressure
  • High Total Dissolved Solids

Safety Features:

  • Red Emergency Shut Down Switch
  • High Pressure Safety Valve Set to 1000 PSI
  • RO Vessel Factory Tested to 100 PSI
  • RO Vessel Burst Pressure 6000 PSI
  • Skid Load Test & Sling Recertified Every 12 Months
  • Electric Panel & Components Meet Class I Div. II Rating
  • Fully Enclosed Belt & Pully Guards

Instrumentation & Meters:

  • Cartridge Filter Inlet Gauge (Seawater Feed)
  • Cartridge Filter Differential Gauge
  • Cartridge Filter Outlet Gauge
  • 0-20 GPM Freshwater Flow Meter
  • RO Membrane Pressure Gauge
  • RO Membrane Pressure Regulator
  • Total Dissolved Solid Meter (TDS) Set to 1000 PPM

Key Features & Included Items
  • All Stainless Steel Piping, High Pressure Hose Ends, Low Pressure Hose Ends
  • High Pressure Pump Fluid End Made With Duplex Stainless Steel For Long Lasting Operations.
  • Access To Filter Vessel For Quick & Easy Filter Changes When Needed.
  • Installation, Operating Instruction And Troubleshooting Tips Clearly Visible On Front Of Sytem
  • Schambo Manufacturing LLC Contact Information On Every Skid. Phone, Fax, Web Site.
  • 150’ Power Cord Included With Every Rental System.
  • 100′ Feed Water Hose, 100′ Freshwater Hose And 100′ Brine Reject Hose Included With Every Rental.
  • Drain Plugs Located On Both Ends Of The Skids With Sloped Drain Pans.
  • DISA Participant
  • ISNet World

Dual Preassure Set

  • 3’8” Wide
  • 5’ Long
  • 6’ 3” Height
  • 2,500 LBS
  • Electrical Panel & Components Meet Class 1 Div.II
    Rating
  • Power 208-230/460 Volt, 3 phase 35/17.5 amps
  • (150’ power cord included 8/4)
  • Max flow rate @ 60 PSI 90 GPM
  • 2 – 5 HP Pressure Pumps
  • 2 – 85 Gallon Tank
  • Max Drawdown 60 Gallons
  • Max Turn Off Set Pressure 60 PSI
  • Minimum Turn On Set Pressure 40 PSI
  • 2 – Pressure Switch
  • 0-160 Pressure Gauge
  • 6 – 40” Element Cartridge Filter Vessel Fiberglass with SS
    Spring Assemblies
  • Marine Coat Paint Spec
  • Inlet Dual 2” Stainless Steel Camlock
  • Outlet Dual 2” Stainless Steel Camlock
  • Skid Load Test & Sling Recertified Every 12 Months

Key Features & Included Items
  • All Stainless Steel Piping and Stainless Steel Low Pressure Hose Ends.
  • Access To Filter Vessel For Quick & Easy Filter Changes When Needed.
  • Schambo Manufacturing LLC Contact Information On Every Skid. Phone, Fax, Web Site.
  • 150’ Power Cord Included With Every Rental System.
  • Drain Plugs Located On Both Ends Of The Skids With Sloped Drain Pans.

ALLN1 RO-Tank-Pressure Set

Patent Pending

Skid Dimensions & Weight:

  • 7’6″ Wide
  • 10’6″ Long
  • 9’0″ Height
  • 9,500 LBS

250/500 BPD System Flow Rates:

  • Seawater Feed 20/35 GPM
  • Freshwater 7.30/14.60 GPM
  • Brine Reject 12.7/20.4 GPM

System Shut Down Indicators:

  • Yellow Amber Lights Located on Front of Electrical Panel
  • Low Main Pump Suction Pressure
  • Oil Level High/Low
  • High Filter Differential Pressure
  • High Total Dissolved Solids

 

Safety Features:

  • Red Emergency Shut Down Switch
  • High Pressure Safety Valve Set to 1000 PSI
  • RO Vessel Factory Tested to 1100 PSI
  • RO Vessel Burst Pressure 6000 PSI
  • Skid Load Test & Sling Recertified Every 12 Months
  • Electric Panel & Components Meet Class I Div. II Rating
  • Fully Enclosed Belt & Pully Guards

Storage Tank

  • Volume 55 Barrels (2310 Gallons)
  • RO Set to automatically fill when level drops 10”
  • Stainless Steel
  • Inline Chlorinator

Pressure Set

  • Max flow rate @ 60 PSI 90 GPM
  • 2 – 5 HP Pressure Pumps
  • 2 – 85 Gallon Pressure Tanks

Key Features & Included Items
  • All Stainless Steel Piping, High Pressure Hose Ends, Low Pressure Hose Ends.
  • High Pressure Pump Fluid End Made With Duplex Stainless Steel For Long Lasting Operations.
  • Access To Filter Vessel For Quick & Easy Filter Changes When Needed.
  • Installation, Operating Instruction, and Trouble Shooting Tips Clearly Visible On Front Of System.
  • When System Shuts Down, Indicator Light Will Stay On Until Problem Is Fixed And Operator Reset Shut Down.
  • Schambo Manufacturing LLC Contact Information On Every Skid. Phone, Fax, Web Site.
  • 100’ Power Cord Included With Every Rental System.
  • 100’ Feed Water Hose, 100’ Freshwater Hose, And 100’ Brine Reject Hose Included With Every Rental.
  • Drain Plugs Located On Both Ends Of The Skids With Sloped Drain Pans.

Filter VesselFilter Vessel Top View

 

 

 

 

 

 

 

 

 

 

 

 

 

Filter Vessel Specifications
  • Filter Lengths: 20”, 30”, 40”
  • Filter OD: 2.5”
  • Operating PSI: 150 PSI
  • Material Make Up: PVC, Stainless Steel
  • Inlet Size: 1”, 1.5”, 2”
  • Outlet Size: 1”, 1.5”, 2”
  • 6 – Cartridges

24_hour_supportSchambo Manufacturing, L.L.C. also provides 24 hour technical support with technicians fully certified for offshore work. As a subscriber to ISNetworld all certification and training certificates are uploaded and maintained for customer viewing. Our technicians are ready and can be dispatched as the requirement arises.

Go to top

Aftermarket PartsWe also stock a wide inventory of replacement parts for all brands of Reverse Osmosis systems which includes: pumps, cartridge filters vessels, pressure vessel, parts for vessels, gauges, meters, sensors, etc…Schambo Manufacturing L.L.C. can also provide custom designs and sizes to fit your facilities needs and requirements.